|
Page due for repair and image replacement
 Procentec ProfiTrace 2 is the most powerful analyzer for PROFIBUS networks. The very latest generation in bus monitoring technology, combining all primary tools :-
- Busmonitor
- Oscilloscope
- Bar graph
- Topology Scan
- Reporting
- DP Master
and - OPC Server
Technicians can check and troubleshoot a complete PROFIBUS network with 1 software package on your laptop PC and 1 piece of extra hardware - an enormous reduction in equipment weight, costs and required knowledge. The advanced USB hardware (ProfiCore™ Ultra) is internally equipped with a high-speed digital oscilloscope and able to capture bus signals running at 12 Mbps.
 ProfiTrace is an essential tool for maintenance, commissioning and troubleshooting as well as product development. Typical failures such as noise, reflections, voltage drops, termination problems, double addresses, wire breaks and configuration faults are easily identified.
Random errors such as overshoots, error telegrams, repeats and diagnostics can also be captured and logged. The results can be exported to detailed reports which are accepted by  the industry. Predictive maintenance and asset management are really possible with ProfiTrace! This outstanding tool that fits in your pocket, will boost the capabilities of service, maintenance and engineering technicians.
Not only can Hi-Port supply these super kits, but we can also help you to install, set-up and get started, with our comprehensive ProfiTrace User Traing Courses - the fastest and easiest way of getting your new ProfiTrace kit up and running for ongoing fault-finding and maintenance checks!
!
|
Busmonitor for DP and PA with powerful statistics
Repeats, fall-outs, corrupted messages, diagnostics, cycle time, etc. |
|
High-speed digital oscilloscope - ScopeWare
Differential voltage, A-line, B-line, noise, overshoots, reflections, triggers. |
|
Bar graph
Average, Min. and Max. values of the bus signals per device. |
|
Topology Scan
Automatic generation of the network topology. |
|
Reporting
Automatic generation of detailed reports that are accepted by the industry. |
|
DP master - ProfiCaptain
A complete DP master has been integrated (V0 and V1). |
|
ProfiCore Ultra USB interface
Useable on PC platforms, no power supply required and elimination of spur lines. |
|
OPC server and CommDTM |
|
XP, Vista, Windows 7 and Windows 8 platforms |
|
Multi language user interface |
|
|
Troubleshooting & maintenance of PROFIBUS networks
(ProfiTrace, ScopeWare, Topology scan and ProfiCaptain) |
|
Commissioning of PROFIBUS networks
(ProfiTrace, ScopeWare, Topology scan and ProfiCaptain) |
|
PROFIBUS product testing and verification
(ProfiTrace, ScopeWare, ProfiCaptain and CommDTM) |
|
Passive cable testing
(ScopeWare and ProfiCaptain) |
|
I/O testing of PROFIBUS devices
(ProfiCaptain) |
|
Setting up and diagnose PROFIBUS devices
(CommDTM) |
|
Address setting of PROFIBUS devices
(ProfiCaptain) |
|
Interface for bus statistics and device I/O to external apps
(OPC server) |
|
Education |
|
 |
|
"Colours make it easy….."
The Live List is a matrix that continuously lists all the available devices. It is directly visible which devices are ‘troublemakers’.
With different background colours the status of the devices is displayed;
• Green: Device is in Data Exchange
• Yellow: Device is lost
• Red: Parameter fault
• Purple: Configuration fault
• No colour: Not in Data Exchange
The Live List can also generate the product name of the devices when a diagnostic message is captured (synchronized with the GSD library).
|
"Click and go….."
The statistics matrix is the most powerful feature of the analyzer. This field can really indicate what the condition of the installation is. It displays all the important information that a user, especially a maintenance technician is really interested in;
• Retry messages.
• Fall-outs.
• Bus cycle time.
• Diagnostic messages, etc.
Because of this feature, the user does not have to inspect messages or do difficult operations to ensure the quality of the installation.
If the statistics do NOT show deviations, the installation is on the 1st degree OK!!!
|
|
"The absolute truth....."
When the user records messages, he has a perfect visual representation on the screen;
• Visualization of FDL, DP, DP-V1, DP-V2, PA and I&M messages.
• Messages can be filtered and stored.
• Data interpretation of bytes, words, floating points, etc.
• Error detection.
• Bookmarks.
|
 |
 |
 |
|
"The easiest oscilloscope ever....."
With the built in oscilloscope we can detect; noise, reflections, termination problems, etc.
• Time scale: 50 ns to 500 ms.
• Voltage scale: 0,5 to 5 V per DIV.
• Cursors (voltage and time).
• Differential (B-A) and single ended (A and/or B line) measurements.
• Trigger per device or free running.
• Trigger features: start of response, request message and voltage level.
• Bit interpretation engine.
|
 |
|
• All features of ScopeWare DP.
• Max. 33 V DC.
• Max. 1,2 Vtt AC.
• AC and DC can be displayed simultaneously.
• Detects missing termination.
• PA Probe Ultra is required.
|
 |
|
The bar graph is a helpful utility to get an impression of the overall signal quality of the network.
• Shows driver voltages for all connected devices
• Average, Minimum and Maximum signal levels per device
• Colour indication of the signal quality
• Continuously updated
|
• Automatic generation of the network topology.
• No shutdown required!
• No disturbance in the cycle time!
• Works on 500 kbps and 1,5 Mbps.
• On passive networks in conjunction with ProfiCaptain.
|
|
 |
|
 PROFIBUS
• 12 Mbps (all baudrates)
• Galvanic isolated PROFIBUS interface
• Latest RS 485 technology
Oscilloscope
• Frequency: 2 x 192 MHz
• Bandwidth: 100 MHz
• Differential measurement: -9..+9 V
• Single ended: -4,5..+8 V
• Synch available for external scope
Others
• High-speed USB 2.0 interface
• External power supply possible if required
|
Products
|
Order code
|
Description |
|
Troubleshooting
Toolkit Ultra Plus
|
37021 |
• ProfiCore Ultra
• USB cable
• Tap Connector
• Blue carrying case
• ProfiTrace 2
• ScopeWare
• Bar graph
• Topology Scan
• Reporting
|
|
Trouble shooting Toolkit
Ultra Pro
|
38022 |
• ProfiCore Ultra
• USB cable
• Tap Connector
• Blue carrying case
• ProfiTrace 2
• ScopeWare
• Bar graph
• Topology Scan
• Reporting
• PA Probe Ultra
• ProfiCaptain
• OPC Server
|
|
DB9 - M12 Tap Connector
|
101-00052B
|
Allows ProfiCore Ultra
connection onto M12
cables
|
|
DP9 Tap Connector
|
13020
|
Short test cable for
linking ProfiCore Ultra
to test point on your
PROFIBUS network.
Included in both
Plus and Pro Kits
|
|
PA Probe Ultra
|
14020
|
Allows ScopeWare
inspection and
measurement of PA
segment voltages
and waveforms.
Included in Pro Kit
|
|
CommDTM Software
|
101-00241A
|
Enables FDT access
to slave devices
using FieldCare,
PACTware
or similar software
|
|
OPC Server
|
101-00231B
|
Included in Pro Kits
|
|
ProfiCaptain
Master Software
|
22020
|
Allows ProfiCore Ultra to run
as primary or secondary
Master driving PROFIBUS
network. Included in Pro kits
|
Downloads & Links
Current ProfiTrace User Manual
ProfiTrace Licencing FAQs
Cable Length Measurement using ProfiTrace
Commission New Networks using ProfiTrace
Click here for a Report example. (omitting later waveforms)
|
