ProfiTrace Version 2.9.0 software upgrade


• New: Risk Margin added (how much margin there is left in the worst detected signal)
• New: Wizard functionality. New automated processes added for scanning and reporting on the status of both active and quiet / inactive networks
• New: Includes scanning for slaves on an inactive network (does a network scan and keeps master online)
• Improvement: The network condition indicator (Overview tab) now also measures and takes the idle voltage  into account
• Improvement: The Risk Margin is taken into account for the network condition indicator
• Improvement: The current network status condition is now permanently shown in the top of screen Overview tab for direct feedback, with green for good, amber for some errors or red
• Improvement: In ProfiCaptain, if the GSD catalog is filtered on "Found in live list" or "Last network scan" also the address is specified for convenience
• Fix: In ProfiCaptain, if the slave setup dialog is closed, sometimes outputs would temporarily go to 0
• Fix: ProfiCaptain/ProfiCore sometimes caused corrupted/wrong data-exchange telegrams (low level telegram formatting/content disruption was the cause)
• Fix: The "short ack" telegram was not checked fully. Sometimes corruption after the "short ack" was ignored, while it should be shown as illegal
• Fix: Time counters were not cleared in the overview section after reset requested